1. The ideal storage temperature for rubber seals is 5-25 ℃ and should not exceed 25 ℃. Do not come into contact with heat sources and sunlight. Seals taken out from low-temperature storage should be stored at room temperature for at least 10 minutes before use.

2. Rubber seals can be cleaned with soap and water if needed. Do not use liquids, organic solvents, or sharp knives. The cleaned rubber seal should be dried at room temperature and kept away from heat sources. Keep the environment for storing sealant clean.

3. The relative humidity inside the rubber seal warehouse should be below 70%. Avoid being too wet or too dry to prevent condensation.

4. Rubber sealing rings should not be exposed to direct sunlight and should be stored away from light, especially to avoid exposure to strong light and ultraviolet rays. The protective effect that sunscreen packaging can provide. It is recommended to apply red or orange paint or film on the warehouse windows.

5. Radiation: Avoid damaging the seal by ionizing radiation.

6. Irregular: Rubber seals should be placed in a free and loose manner to avoid deformation such as tension and pressure, and should not be hung or stacked.

7. Packaging: The rubber seal should not come into contact with solvents, oils, magnetic materials, etc., which may damage the rubber. PVC material cannot be used for sealing packaging. Seals made of different materials cannot be mixed.

8. Storage period: The storage period of rubber products depends on the type of rubber material.

9. Oxygen and ozone: Rubber materials should avoid contact with circulating air. Its purpose can be achieved through appropriate methods such as packaging, wrapping, and storage in containers with good airtightness. In the storage space, it is not advisable to have devices that generate ozone, such as mercury vapor lamps, high-voltage electrical appliances, electric motors that are prone to generating sparks or static electricity, etc.